Class 1 Nickel Commences Geophysics Programs

Geotech Ltd proprietary time-domain electromagnetic system VTEM™ deployed to confirm possible extents to zones of historical Mineral Resources and to identify new nickel targets

Geotech Ltd has been appointed to fly Heliborne VTEM™ and Horizontal Magnetic Gradiometer geophysical surveys over the entire 20 square km Alexo-Dundonald Ni-Cu-PGE Project area

  • First ever modern geophysics campaign has commenced at Alexo-Dundonald Ni-Cu-PGE
  • Geotech Ltd proprietary time-domain electromagnetic system VTEM™ deployed to confirm possible extents to zones of historical Mineral Resources and to identify new nickel targets
  • Deeper penetrating ground-based geophysics to also determine possible depths to new Mineral Resource targets

Toronto, Ontario, September 16, 2020: Class 1 Nickel & Technologies Limited (“Class 1 Nickel” or the “Company”) (CSE: NICO), is excited to announce that it has contracted Geotech Ltd to fly an extensive VTEM™ plus time-domain electromagnetic survey with additional horizontal magnetic gradiometry over its entire Alexo-Dundonald Nickel-Copper-PGE Property, situated 45 km northeast of the centre of Timmins, Ontario.

Alexo Dundonald Location Map

C1N_AlexoDundonald-Map

The Alexo-Dundonald Ni-Cu-PGE Project consists of the Alexo, Kelex, Dundonald North and Dundonald South nickel deposits. The Alexo Deposit sits on the northeast arm of a large interpreted “Z”-shaped komatiite fold, while the Dundonald Deposit sits on the southwest arm of the same fold. A past producing operation (historical 2.0% to 4.0% nickel head grade) left historical nickel sulphide Mineral Resources (Ni-Cu-Co-PGE) that remain open at depth and along strike.

Geophysical consultant for Class 1 Nickel, Mr. Alan King, commented, “Class 1’s nickel team is eagerly anticipating the completion and interpretation of the VTEM survey. Having a new, higher resolution AEM survey will allow us to compare signatures from the known mineralized sulphide zones with what may lay deeper and/or surrounding the known deposits, and will be valuable in determining the potential of the Alexo-Dundonald Property.”

Conducting the VTEM and magnetic survey over the existing Alexo-Dundonald historical Mineral Resources and interpreted Z-folded komatiitic peridotite will allow the technical team to map conductors of significance in subsurface areas that may be associated with magmatic semi-massive to massive Ni-Cu-Co-PGE sulphides, to an initial depth of approximately 300 metres. Targets from the airborne survey will be followed up on using surface AEM and/or drilling, and borehole EM surveys, as appropriate.

The VTEM Plus system is Geotech Ltd.’s flagship helicopter TDEM system, with over 3,000,000 line-km flown around the world for base and precious metals exploration. It’s large transmitter dipole moment and high signal to noise are ideally suited for the komatiitic Ni-Cu-Co-PGE targets sought by Class 1 Nickel.

Mr. Eugene Puritch, President of P&E Mining Consultants Inc. stated, “Successful nickel sulphide mines can plunge to depths of in some cases more than 1 or 2 km from surface, therefore the potential size and scale of Alexo-Dundonald is presently unknown. Considering that the majority of historical drilling and mining at Alexo-Dundonald has only ever been shallow work at less than 100 m below surface, the great bulk of the 20 square km Property remains essentially untested. Therefore, we are all keenly interested to see the potential generation of additional nickel sulphide targets.”

Alexo Dundonald local geology and mineralized zones

figure2_geology-resized

 

Qualified Person

The technical information in this news release has been reviewed and approved by Eugene Puritch, P.Eng. FEC, CET, President of P&E Mining Consultants Inc. and Independent Qualified Person as defined by NI 43-101.

 

About Class 1 Nickel & Technologies Limited

Class 1 Nickel & Technologies Limited (CSE: NICO) is a Mineral Resource company focused on the development of its 100% owned Alexo-Dundonald Project, an advanced portfolio of komatiite hosted magmatic nickel-copper-cobalt sulphide projects located 43 km northeast of Timmins, Ontario.

 

For more information, please contact:

Benjamin Cooper, President

T: 416.454.0166

E: info@class1nickel.com

 

For the full article click here.

 

You Might Also Be Interested In